LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Engine Mechanical - 1.6L (LDE, LLU, And LXV) Or 1.8L (2H0) - Repair Instructions - On Vehicle) >> Camshaft Intake Sprocket with Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Camshaft Sprockets, Caps & Bolts
    GM2049382Courtesy of GENERAL MOTORS CORP.
    NOTE: When removing the camshaft sprockets, the timing belt replacement procedure must be followed to ensure the camshafts and crankshaft are locked into position.
  1. Remove the timing belt. Refer to Timing Belt Replacement .
  2. Remove the camshaft intake sprocket bolt cap (4).
  3. Remove the camshaft intake sprocket bolt (3).
  4. Remove the camshaft intake sprocket with actuator (1).
scientia non olet · About LEMON Manuals