Installation Procedure

WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Auxiliary Oil Cooler

Courtesy of GENERAL MOTORS CORP.

Install the auxiliary oil cooler to the vehicle.

NOTE: Refer to Fastener Notice .

Install the bolts to the transmission fluid auxiliary cooler.
Tighten: Tighten the bolts to 12 N.m (9 lb ft).
Install the transmission fluid cooler hoses to the transmission fluid auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .