Output Shaft Seal Replacement (AWD Models Only)

WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Output Shaft Seal Replacement (AWD Models Only)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Output Shaft Seal Assembly NOTE: Refer to Seal Reuse Notice . Special Tool J 37212 Front Output Shaft Seal Installer (6L50) J 38693 Seal Installer (6L80). See Special Tools . J 45000 Seal Remover. See Special Tools .