Output Carrier to Output Shaft Assemble (6L80/6L90)
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Output Carrier Thrust Bearing Assembly |
| 2 | Output Carrier Internal Front Gear
NOTE:
Install the gear flat side down. Failure to install the gear flat side down may result in transmission damage.
|
| 3 | Output Shaft Assembly |
| 4 | Output Carrier Internal Gear Retaining Ring Tip: Grasp the output shaft and carrier with both hands to turn over. |