Instrument Panel Cluster Trim Plate Bezel Replacement
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Move the steering wheel to its lowest possible position. |
|
| 1 | Instrument Panel Cluster Trim Plate Bezel Screw (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 2.5 N.m (22 lb in) |
| 2 | Instrument Panel Cluster Trim Plate Bezel Assembly |
| 3 | Retainer Clip (Qty: 4) |