Instrument Panel Center Air Outlet Bezel Replacement

WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Center Air Outlet Bezel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Instrument Panel Center Air Outlet Bezel Assembly Preliminary Procedure Use a flat bladed plastic trim tool in order to release the trim bezel from the instrument panel assembly. Disconnect the electrical connections to the trim bezel. When replacing the instrument panel center air outlet bezel, transfer all necessary components.
2	Retainer Clips (Qty: 10)

Callout

Component Name

Instrument Panel Center Air Outlet Bezel Assembly

Preliminary Procedure

Use a flat bladed plastic trim tool in order to release the trim bezel from the instrument panel assembly.
Disconnect the electrical connections to the trim bezel.
When replacing the instrument panel center air outlet bezel, transfer all necessary components.

Retainer Clips (Qty: 10)