Liftgate Sill Trim Plate Replacement
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Liftgate Sill Trim Plate Screw (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 2 | Liftgate Sill Trim Plate Assembly Procedure: Grasp the liftgate sill trim plate and pull upward disengaging the clips securing it to the body. |
| 3 | Retainer Clip (Qty: 9) |