LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Automatic Transmission - 4T80-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Torque Converter Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View of Torque Converter Cover
    GM627396Courtesy of GENERAL MOTORS CORP.
  2. Remove the attaching bolts and the engine-to-transmission brace.
  3. Remove the torque converter cover.
scientia non olet · About LEMON Manuals