LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Automatic Transmission - 4T80-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Parking Gear Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Final Drive Internal Gear & Snap Ring
    GM687607Courtesy of GENERAL MOTORS CORP.
  1. Remove the final drive assembly. Refer to Final Drive Assembly Replacement .
  2. Remove the final drive internal gear snap ring (135).
  3. Remove the final drive internal gear.
  4. Remove snap ring from park gear.
  5. Remove park gear from housing.
scientia non olet · About LEMON Manuals