LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Automatic Transmission - 4T80-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Holding Fixture Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing J 39050 & J 3289-20 On Transmission
    GM509530Courtesy of GENERAL MOTORS CORP.
  1. Install the J 39050:  holding fixture on the transmission.
  2. Install the J 39050:  holding fixture and the transmission into the J 3289-20:  support fixture base.
  3. Position the transmission with the case extension pointing downward in order to allow the fluid to drain.
  4. Insert the pin into the J 3289-20:  support fixture base.
scientia non olet · About LEMON Manuals