Assembly Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Lower Channel Plate Accumulator Bores & Mating Surfaces

Courtesy of GENERAL MOTORS CORP.

Inspect the lower channel plate accumulator bores and mating surfaces for scratches or damage.

Fig 2: Inspection Areas On Lower Channel Plate

Courtesy of GENERAL MOTORS CORP.

Inspect the bottom side of the lower channel plate for damage to the bolt holes or debris in passages.

Fig 3: Identifying Spacer Plate & Gasket Assembly & Lower Channel Plate With J 39630-1 & J 39630-2

Courtesy of GENERAL MOTORS CORP.

Insert the J 39630-1: guide pins into the lower channel plate (900) and rest the channel plate on the guide pin heads.
Install the J 39630-2: guide pins into the lower channel plate (900).
Install the spacer plate and gasket assembly (935) onto the lower channel plate (900).