Television Antenna Module Scan Tool Information
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Television Antenna Module Scan Tool Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Antenna 1-4 Status | - | OK | The scan tool displays OK, Short to GND, Disconnected. This is the status of the specified antenna. |
| Antenna Receiving Audio | - | Varies | The scan tool displays Antenna 1-4. This is the status of the antenna receiving audio. |
| Antenna Receiving Video | - | Varies | The scan tool displays Antenna 1-4 and last selected. This is the status of the antenna receiving video. |
| Battery Voltage | - | Varies | The scan tool displays volts. This is the current battery voltage. |
| Module Temperature | - | Varies | The temperature is measured in C°. This is the current temperature of the module. |
| Point of Sale | - | Not Available | The scan tool displays Not Available, Central Europe, Italy, UK/Ireland/HK, East Eur. PAL, East Eur. SECAM, France, North America, Australia, Brazil, Argentina, New Zealand, Middle East, China, Africa PAL, Africa SECAM, Greece, Japan, Saudi Arabia, and Morocco. This is the intended destination of the vehicle. |
Television Antenna Module Output Controls
| Scan Tool Output Control | Description |
|---|---|
| TV Region Lockout | This output control does not allow you to change regions. |
| TV Region Select | This output control will let you select through the different regions. |