Center Pillar Upper Garnish Molding Replacement
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front |
|
| 1 | Upper Garnish Molding Cover |
| 2 | Upper Garnish Molding Screw
CAUTION:
Refer to Fastener Caution
.
Tighten: 2 N.m (18 lb ft) |
| 3 | Center Pillar Upper Trim Panel Assembly Tip: Pull the trim panel toward the inside of the vehicle to disengage the retainers. Tighten: 35 N.m (25 lb ft) |