Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Disable the air bag system. Refer to SIR Disabling and Enabling
.
- Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement
.
- Lower the door opening frame garnish moldings (1, 2) on the front and rear door pinch weld flanges.
- Remove the assist handles. Refer to Assist Handle Replacement
.
Courtesy of GENERAL MOTORS CORP.
- Gently pry and remove the windshield side garnish moldings (1).
- Remove the sunshades and retainers. Refer to Sunshade Replacement
.
- Remove the courtesy and reading lamp/sunroof switch assembly, if equipped. Refer to Sunroof Switch Replacement
f.
- Remove the dome lamp. Refer to Dome Lamp Replacement
.
- Remove the quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement
.
Courtesy of GENERAL MOTORS CORP.
- Lower the front seat back cushions in order to gain clearance to remove the headlining trim finish panel.
- Remove the 2 retainers (2) which secure the rear of the headlining trim finish panel.
- Lower the headlining trim finish panel (1). Remove the headlining through a rear door.