Rear Door Window Regulator: Service and Repair

Rear Side Door Window Regulator Replacement

Removal Procedure





1. Remove the rear door window. Refer to Rear Side Door Window Replacement (Service and Repair).
2. Remove the following components from the rear door:

* The 4 retaining bolts (4)
* The rear side door window regulator (3)




Installation Procedure





1. Apply a multipurpose grease to all lubrication and sliding points.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Slide the regulator arm roller (2) into the window bottom channel (1). Secure the regulator with the 4 bolts (4).

Tighten the regulator bolts to 8 N.m (71 lb in).

3. Install the rear door window. Refer to Rear Side Door Window Replacement (Service and Repair).