Hazard Warning Switch: Service and Repair

Hazard Warning Switch Replacement

Removal Procedure





1. Remove the instrument panel (I/P) center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Service and Repair).
2. Disconnect the hazard warning switch electrical connector (1).




3. Press down on the tabs (2) and remove the hazard warning switch (3) from the I/P center trim panel.



Installation Procedure





1. Install the hazard warning switch (3) to the I/P center trim panel.




2. Connect the hazard warning switch electrical connector (1).
3. Install the I/P center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Service and Repair).