Rear Accessory Panel Replacement

Rear Accessory Panel Replacement

Removal Procedure





1. Remove tool storage access panel (8), by turning the knob (9).
2. Unlock the accessory panel, by turning the knobs (2).
3. Remove the accessory panel bolts (10).
4. Remove the rear accessory panel (1).



Installation Procedure





1. Install the rear accessory panel (1) to the vehicle.
2. Install the bolts (10) to the accessory panel (1).
3. lock the rear accessory panel, by turning the knobs (2).
4. Install the tool storage access panel (8).