LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Replacement >> Removal Procedure

Removal Procedure

  1. Fold down seat back.
    2. Fig 1: Plastic Hinge Covers, Hinge Bolts, Lower Bolts And Rear Seat
    GM833610Courtesy of GENERAL MOTORS CORP.
  2. Remove the plastic hinge covers (1).
  3. Remove seat back hinge bolts (2).
  4. Remove center seat belt retractor, if necessary. Refer to Seat Belt Retractor Replacement - Center Rear .
  5. Remove the lower bolts (3) from the seat.
  6. Remove the rear seat (4) from the vehicle.
scientia non olet · About LEMON Manuals