LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Cushion Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Seat Cushion Components
    GM849882Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back trim panel. Refer to Rear Seat Back Cushion Trim Panel Replacement (Left)  or Rear Seat Back Cushion Trim Panel Replacement (Right) .
  2. Remove the 2 pivot bolts (2).
  3. Remove the 2 lower mounting bolts (4).
  4. Pull the rear seat cushion forward in order to remove the cushion from the vehicle.
scientia non olet · About LEMON Manuals