LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Cushion Cover and Pad Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Hog Ring Pliers And Rear Seat Cushion
    GM404793Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat cushion cover to the seat cushion.
  2. Use hog ring pliers (1) to install new hog rings. Ensure that the rear seat cushion cover is secured to the cushion (2).
  3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
scientia non olet · About LEMON Manuals