LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Release Latch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back trim panel (3). Refer to Rear Seat Back Cushion Trim Panel Replacement (Left)  or Rear Seat Back Cushion Trim Panel Replacement (Right) .
  2. Remove rear seat latch knob (11) and retainer (10).
  3. Remove the rear seat back cover (6). Refer to Rear Split Folding Seat Back Cushion Cover and Pad Replacement .
  4. Remove the 2 bolts (7) from the seat back latch (8).
  5. Remove the seat back latch (8) and rod (9) from the rear seat.
scientia non olet · About LEMON Manuals