LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Release Latch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat back latch (8) and rod (9) to the rear seat.
  2. Install the rear seat back latch bolts (7) to the rear seat back latch.
  3. Install the rear seat back cushion cover (6). Refer to Rear Split Folding Seat Back Cushion Cover and Pad Replacement .
  4. Install the seat latch retainer (10) and knob (11).
  5. Install the rear seat back trim panel (3). Refer to Rear Seat Back Cushion Trim Panel Replacement (Left)  or Rear Seat Back Cushion Trim Panel Replacement (Right) .
scientia non olet · About LEMON Manuals