LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Trim Panel Replacement (Right) >> Removal Procedure

Removal Procedure

    Fig 1: Right Rear Seat Back Trim Panel Components
    GM849452Courtesy of GENERAL MOTORS CORP.
  1. Fold down the right rear seat back cushion.
  2. Remove the 2 access panels (3).
  3. Remove the 4 screws (2) from the rear seat back trim panel (4).
  4. Unclip and remove the right rear seat back trim panel (4).
scientia non olet · About LEMON Manuals