LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Trim Panel Replacement (Right) >> Installation Procedure

Installation Procedure

    Fig 1: Right Rear Seat Back Trim Panel Components
    GM849452Courtesy of GENERAL MOTORS CORP.
  1. Install the right rear seat back trim panel (4) to the right rear seat back.
  2. Secure the trim panel 4 with the 4 screws (2).
  3. Install the access panels (3) to the trim panel (4).
  4. Return the right rear seat to the up right position.
scientia non olet · About LEMON Manuals