LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Frame Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat back cushion pad (5) and cover (6) to the frame (4). Refer to Rear Split Folding Seat Back Cushion Cover and Pad Replacement .
  2. Install the rear seat back cushion. Refer to Rear Split Folding Seat Back Replacement .
  3. Install the rear seat head restraint (1). Refer to Rear Seat Head Restraint Replacement .
scientia non olet · About LEMON Manuals