LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Hog Ring Pliers And Rear Seat Cushion
    GM404793Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat back cushion cover to the seat cushion.
  2. Use hog ring pliers (1) to install new hog rings. Ensure that the rear seat back cushion cover is secured to the cushion (2).
    3. Fig 2: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  3. Install the head rest supports (2) to the seat back (6).
  4. Install the lock release grommet (10) and button (11).
  5. Install the rear seat back cushion. Refer to Rear Split Folding Seat Back Replacement .
scientia non olet · About LEMON Manuals