LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Folding Seat Back Center Pivot Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Center Pivot Support And Bolts
    GM848941Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back cushion. Refer to Rear Split Folding Seat Back Replacement .
  2. Remove the following components from the vehicle:
    • The 2 bolts (2) that retain the rear seat back cushion center pivot support (1)
    • The rear seat back cushion center pivot support (1)
scientia non olet · About LEMON Manuals