LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Folding Seat Back Center Pivot Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Center Pivot Support And Bolts
    GM848941Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  1. Install the rear seat back cushion center pivot support (1) to the vehicle. Secure the support with the 2 bolts (2).

    Tighten:  Tighten the center pivot support bolts to 18 N.m (13 lb in).

  2. Install the rear seat back cushion. Refer to Rear Split Folding Seat Back Replacement .
scientia non olet · About LEMON Manuals