LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Replacement - Bucket >> Removal Procedure

Removal Procedure

    Fig 1: Side Impact Inflatable Restraint Module Electrical Connector
    GM241532Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system, if equipped with side impact inflatable restraint modules. Refer to SIR Disabling and Enabling .
  2. Disconnect the side impact inflatable restraint module electrical connector (1), if equipped. The electrical connector is located beneath the seat cushion.
    3. Fig 2: Front Seat Assembly, Seat Bolt Finish Covers And Bolts
    GM815854Courtesy of GENERAL MOTORS CORP.
  3. Remove the following components from the vehicle:
    • The seat bolt finish covers
    • The 4 bolts
    • The front seat assembly
scientia non olet · About LEMON Manuals