LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Cushion Frame Replacement (Driver Side) >> Removal Procedure

Removal Procedure

  1. Remove the drivers front seat assembly. Refer to Front Seat Replacement - Bucket .
  2. Remove the seat belt buckle. Refer to Seat Belt Buckle Replacement - Left Front .
  3. Remove the driver seat back assembly. Refer to Front Seat Back Replacement (Passenger Side)  or Front Seat Back Replacement (Driver Side) .
    4. Fig 1: Front Seat Cushion Frame Replacement (Driver Side)
    GM1867271Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat cushion cover (1) and cushion (2). Refer to Front Seat Cushion Cover Replacement .
  5. Remove the 2 screws (5) and the recliner adjuster inside covers (4).
  6. Remove the 2 screws (7) and the lower seat cushion shields (6).
  7. Remove the seat track handle (10).
scientia non olet · About LEMON Manuals