LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Cushion Frame Replacement (Driver Side) >> Installation Procedure

Installation Procedure

    Fig 1: Front Seat Cushion Frame Replacement (Driver Side)
    GM1867271Courtesy of GENERAL MOTORS CORP.
  1. Install the seat track handle (10).
  2. Install the lower seat cushion shields (6), and secure with the 2 screws (7).
  3. Install the adjuster inside covers (4) and secure with the 2 screws (5).
  4. Install the seat cushion (2) and cover (1). Refer to Front Seat Cushion Cover Replacement .
  5. Install the drivers front seat back assembly. Refer to Front Seat Back Replacement (Passenger Side)  or Front Seat Back Replacement (Driver Side) .
  6. Install the seat belt buckle. Refer to Seat Belt Buckle Replacement - Left Front .
  7. Install the drivers front seat assembly. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals