LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Cushion Cover Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Seat Cushion Cover And Hog Rings
    GM431903Courtesy of GENERAL MOTORS CORP.
  1. Remove the front seat assembly. Refer to Front Seat Replacement - Bucket .
  2. Remove the adjuster knob clip and adjuster knob, if equipped.
  3. Cut the hog rings (3).
  4. Remove the following components from the seat cushion:
    • The hog rings (3)
    • The seat cushion cover (1)
  5. Remove the seat cushion pad from the frame, if necessary.
scientia non olet · About LEMON Manuals