LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Back Recliner Inner Trim Panel Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Front Seat Back Recliner Inner Trim Panel Replacement
    GM1867713Courtesy of GENERAL MOTORS CORP.
  1. Remove front seat assembly. Refer to Front Seat Replacement - Bucket .
  2. Remove the seat adjuster track covers (11). Refer to Front Seat Adjuster Track Finish Cover Replacement (Inboard)  or Front Seat Adjuster Track Finish Cover Replacement (Outboard) .
    3. Fig 2: Recliner Handle And Retaining Tab
    GM863383Courtesy of GENERAL MOTORS CORP.
  3. Using a flat-bladed tool, remove the recliner handle (1) from the front seat outboard adjuster by disengaging the retaining tab (2).
    4. Fig 3: Trim Cover, Retaining Tab, Screw
    GM863382Courtesy of GENERAL MOTORS CORP.
  4. Remove the screw (3) from the trim cover (1).
  5. Disengage the retaining tab (2) and slide trim cover (1) upward to remove.
scientia non olet · About LEMON Manuals