LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Back Recliner Inner Trim Panel Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Trim Cover, Retaining Tab, Screw
    GM863382Courtesy of GENERAL MOTORS CORP.
  1. Install trim cover (1) over recliner, and slide down until tab (2) engages.
  2. Install the screw (3) to the trim cover (1).
    3. Fig 2: Recliner Handle And Retaining Tab
    GM863383Courtesy of GENERAL MOTORS CORP.
  3. Install the recliner handle (1) to the front seat adjuster by engaging the retaining tab (2).
  4. Install the seat adjuster track covers. Refer to Front Seat Adjuster Track Finish Cover Replacement (Inboard)  or Front Seat Adjuster Track Finish Cover Replacement (Outboard) .
  5. Install the front seat assembly. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals