LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Back Cushion Cover and Cushion Pad Replacement (Driver Side) >> Removal Procedure

Removal Procedure

    Fig 1: Head Restraint, Restraint Guides And Seat Back Cushion
    GM431906Courtesy of GENERAL MOTORS CORP.
  1. Remove the front seat assembly. Refer to Front Seat Replacement - Bucket .
  2. Remove the front seat back assembly. Refer to Front Seat Back Replacement (Passenger Side)  or Front Seat Back Replacement (Driver Side) .
  3. Remove the head restraint (1) from the seat back cushion (3).
    4. Fig 2: Head Restraint Guides And Seat Back Cushion
    GM431907Courtesy of GENERAL MOTORS CORP.
  4. Gently pry the head restraint guides (1) from the seat back cushion (2) using a flat-bladed tool.
    5. Fig 3: Seat Back Trim Panel
    GM1867273Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat back trim panel, if necessary. Refer to Front Seat Back Trim Replacement .
  6. Cut and remove the hog rings.
  7. Roll the seat back cushion cover (1) upward slowly and evenly.
  8. Remove the seat back cushion pad (2) from the frame (4), if necessary.
scientia non olet · About LEMON Manuals