LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Back Cushion Cover and Cushion Pad Replacement (Driver Side) >> Installation Procedure

Installation Procedure

    Fig 1: Seat Back Trim Panel
    GM1867273Courtesy of GENERAL MOTORS CORP.
  1. Install the seat back cushion pad (2) to the frame (3), if removed.
  2. Roll the seat back cushion cover (1) down over the seat back cushion (2).
  3. Use hog ring pliers to install new hog rings. Ensure that the seat back cushion cover (1) is secure.
  4. Install seat back trim panel, if removed. Refer to Front Seat Back Trim Replacement .
    5. Fig 2: Head Restraint, Restraint Guides And Seat Back Cushion
    GM431906Courtesy of GENERAL MOTORS CORP.
  5. Install the head restraint guides (2) to the seat back cushion (3).
  6. Install the head restraint (1) to the seat back cushion (3).
  7. Install the front seat back assembly. Refer to Front Seat Back Replacement (Passenger Side)  or Front Seat Back Replacement (Driver Side) .
  8. Install the front seat assembly. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals