LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Adjuster Track Finish Cover Replacement (Outboard) >> Removal Procedure

Removal Procedure

    Fig 1: Retaining Tab And Recliner Handle
    GM845154Courtesy of GENERAL MOTORS CORP.
  1. Disable driver seat SIR, if removing driver seat outer track cover. Refer to SIR Disabling and Enabling .
  2. Disable passenger seat SIR, if removing passenger seat outer track cover. Refer to SIR Disabling and Enabling .
  3. Remove the recliner handle (2) from the front seat outboard adjuster by disengaging the retaining tab (1).
    4. Fig 2: Outer Track Cover, Tabs And Screws
    GM845158Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 screws (2) from the outer track cover (3).
  5. Disengage the tabs (1) from the outer track cover (3).
  6. Remove the outer track cover (3).
scientia non olet · About LEMON Manuals