Installation Procedure

Fig 1: Outer Track Cover, Tabs And Screws

Courtesy of GENERAL MOTORS CORP.

Install the outboard adjuster finish cover (3) to the front seat assembly, by engaging the tabs (1).
Install the 2 screws (2) to the outer track cover (3).

Fig 2: Retaining Tab And Recliner Handle

Courtesy of GENERAL MOTORS CORP.

Install the recliner handle (2) to the front seat outboard adjuster.
Make sure recliner handle tab (1) engages to the recliner.
Enable driver seat SIR, if outer track cover is removed. Refer to SIR Disabling and Enabling .
Enable passenger sear SIR, if outer track cover is removed. Refer to SIR Disabling and Enabling .