LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Adjuster Track Finish Cover Replacement (Inboard) >> Installation Procedure

Installation Procedure

    Fig 1: Front Seat Inboard Adjuster Components
    GM830097Courtesy of GENERAL MOTORS CORP.
  1. Install the inboard adjuster finish cover (4) to the front seat inboard adjuster. Secure the cover with the 2 screws (1).
  2. Install the front floor rear console. Refer to Rear Floor Console Replacement .
scientia non olet · About LEMON Manuals