LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Trim Panel Replacement (Left) >> Removal Procedure

Removal Procedure

    Fig 1: Seat Back Trim Panel Components
    GM849441Courtesy of GENERAL MOTORS CORP.
  1. Fold down the left rear seat back cushion.
  2. Remove the 2 access panels (3).
  3. Remove the 4 screws (2) from the rear seat back trim panel (4).
  4. Unclip and remove the left rear seat back trim panel (4).
scientia non olet · About LEMON Manuals