LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Outer Hinge Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Outer Hinge And Bolt
    GM833400Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back cushion. Refer to Rear Split Folding Seat Back Replacement .
  2. Remove the following components from the vehicle:
    • The 1 bolt which secure the rear seat back cushion outer hinge
    • The rear seat back cushion outer hinge (1)
scientia non olet · About LEMON Manuals