LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cover Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back cushion. Refer to Rear Split Folding Seat Back Replacement .
  2. Remove lock release button (11) and grommet (10).
  3. Remove the head rest supports (2).
    4. Fig 2: Rear Seat Cushion
    GM241636Courtesy of GENERAL MOTORS CORP.
  4. Cut the hog rings around the back perimeter of the rear seat back cushion (1).
  5. Remove the rear seat back cushion cover from the cushion.
scientia non olet · About LEMON Manuals