LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Adjuster Track Finish Cover Replacement (Inboard) >> Removal Procedure

Removal Procedure

    Fig 1: Front Seat Inboard Adjuster Components
    GM830097Courtesy of GENERAL MOTORS CORP.
  1. Remove the front floor rear console. Refer to Rear Floor Console Replacement .
  2. Remove the following components from the front seat inboard adjuster:
    • The 2 screws (1)
    • The inboard adjuster finish cover (4)
scientia non olet · About LEMON Manuals