Transmission Mount Bracket Replacement - Left Side

Fig 1: Identifying Transmission Mount Bracket - Left Side

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the left transmission mount. Refer to Transmission Mount Replacement - Left Side .
1	Transmission Mount Bracket Bolt NOTE: Refer to Fastener Notice . Tighten: 110 N.m (81 lb ft)
2	Transmission Mount Bracket Bolt Tighten: 110 N.m (81 lb ft)
3	Transmission Mount Bracket Bolt Tighten: 110 N.m (81 lb ft)
4	Transmission Mount Bracket