Transmission Front Mount Replacement

Fig 1: Identifying Transmission Front Mount

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Install the engine support fixture. Refer to Engine Support Fixture . Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Front Transmission Mount Thru Bolt NOTE: Refer to Fastener Notice . Tighten: 110 N.m (81 lb ft)
2	Front Transmission Mount Bolt (Qty: 4) Tighten: 50 N.m (37 lb ft)
3	Front Transmission Mount Stud Tighten: 50 N.m (37 lb ft)
4	Front Transmission Mount Tip: Remove the mount through the top of the engine compartment.