Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Left Side or Valve Rocker Arm Cover Replacement - Right Side .
- Remove the lower intake manifold. Refer to Lower Intake Manifold Replacement .
- Remove the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
- Remove the lifter guide bolts.
- Remove the lifter guide.
- Remove the lifters.
IMPORTANT:
Place the valve lifters in an organized order to ensure that they are installed in the same location from which they were removed.