Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
- Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
- Using J 39914 rotate the drive belt tensioner (8) to release the tension on the drive belt.
- Remove the drive belt from the right idler pulley (2).
- Carefully release J 39914 to relieve the drive belt tensioner spring tension.
- Remove J 39914 from the drive belt tensioner (8).
- Loosen the right belt idler pulley bolt.
- Remove the right belt idler pulley and bolt from the generator bracket.