LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 3.4L) >> Repair Instructions - On Vehicle >> Camshaft Rear Bearing Hole Plug Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Camshaft Rear Bearing Hole Plug
    GM105921Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Inspect plug bore for old sealant. Ensure bore is clean and free of knicks and burs.
  1. Apply sealer to the camshaft rear bearing hole plug. Refer to Sealers, Adhesives, and Lubricants  for the correct part number.
  2. Install the camshaft rear bearing hole plug.
    3. Fig 2: Illustrating Proper Camshaft Rear Bearing Plug Specifications
    GM105922Courtesy of GENERAL MOTORS CORP.
  3. Ensure that the camshaft rear bearing plug is installed to specifications.
  4. Install the engine flywheel. Refer to Engine Flywheel Replacement .
scientia non olet · About LEMON Manuals