Water Pump Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Water Pump

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the water pump bolts.
Tighten: Tighten the water pump bolts to 10 N.m (89 lb in).

Fig 2: View Of Water Pump Pulley & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the water pump pulley.
Install the water pump pulley bolts.
Tighten: Tighten the water pump pulley bolts to 25 N.m (18 lb ft).