Exhaust Manifold Removal - Left Side
WARNING: This page is about a different variant/trim than selected.
- Remove the exhaust gas recirculation (EGR) pipe bolts (616) and gasket (610) from the left exhaust manifold.
- Remove the EGR valve bolts (613), EGR valve (614), and gasket (615) from the upper intake manifold and remove the assembly from the engine.
- Remove the spark plug wires from the spark plugs.
- Remove the spark plugs.
- Remove the exhaust manifold heat shield bolts.
- Remove the exhaust manifold heat shield.
- Remove the exhaust manifold nuts.
- Remove the exhaust manifold.
- Remove the exhaust manifold gasket.
- Remove the exhaust studs, if required.